The 46x46 aluminum bracket (Item No. 310.3600A.01) is a precision die-cast aluminum structural connector engineered for modular frame assembly in industrial automation, conveyor systems, and machine building. Think of this component as the keystone of your modular frame — it is the structural junction that defines angular integrity across the entire assembly. Built from die-cast aluminum with a dull polished finish and weighing 71.11G, this adjustable corner profile combines lightweight design with the load-bearing performance required in demanding applications. The mounting bracket aluminum construction ensures dimensional consistency across production batches, supporting repeatable assembly outcomes for B2B procurement teams.
| Item No. | 310.3600A.01 |
| Material | Die-Cast Aluminum |
| Finish | Dull Polished |
| Weight | 71.11G |
| Compatible Profiles | 50 slot 10 |
| Product | Part Number | QTY | Compatible Profiles |
| Bracket | 310.3600A.01 | 1 | 50 slot 10 |
| End Cap | 370.3600A.01 | 1 | |
| T Bolt | 1D07.A42A.01 | 2 | |
| Flange Nut | 2Y50.A41A.01 | 2 |
The reinforced angle casting design of this structural connector delivers higher integrity at joint connection points compared to standard stamped brackets. Die-cast aluminum construction ensures consistent wall thickness and internal geometry — provided that installation torque values are respected and the mating profile slot dimensions fall within standard tolerances. For conveyor frame junctions and robotic arm mounting bases where load direction is not always purely vertical, this mounting bracket aluminum design provides a more defensible structural choice. Real-world cantilevered or dynamic loads place concentrated shear stress on corner joints. The reinforced casting construction accounts for these multi-directional force scenarios, giving engineers confidence in high-demand load-bearing corner applications.
The adjustable corner profile design allows engineers to fine-tune angular alignment without disassembling the entire frame. For machine frames requiring periodic reconfiguration or sensor repositioning, this adjustability translates directly into reduced setup time and lower labor cost per reconfiguration cycle. As long as the T-bolt and flange nut fasteners are tightened to appropriate preload levels, the connector maintains angular position reliably across repeated assembly and disassembly cycles — a key advantage in modular workstation environments that require frequent layout changes.
A recurring challenge in modular frame assembly is cross-supplier T-slot incompatibility — where profiles from one supplier and brackets from another have T-nut slots with slightly different widths or depths, forcing shimming or custom machining on-site. The 46x46 aluminum bracket (PN 310.3600A.01) is engineered for compatibility with 50 slot 10 profile systems, addressing the dimensional precision requirements that automation assembly hardware demands. Components that meet engineering-grade dimensional tolerance requirements are better positioned for precision automation environments where fit-at-first-installation is the expectation, not the exception. The mounting bracket aluminum design integrates directly with T-slot framing without additional modification.
Each bracket set includes the complete hardware required for installation: one unit (PN 310.3600A.01), one end cap (370.3600A.01), two T bolts (1D07.A42A.01), and two flange nuts (2Y50.A41A.01). This kitted approach eliminates the need to source matching fasteners separately — a practical advantage when building multi-frame structures where fastener consistency directly affects assembly repeatability. The reinforced angle casting connector arrives ready for immediate deployment with all required hardware included in the kit.
The dull polished aluminum surface finish provides corrosion resistance suitable for indoor industrial environments and offers a professional, uniform appearance for customer-facing automation stations. Choosing between a dull polished surface and a more aggressive anodized finish comes down to operating environment requirements. For standard indoor automation and machine guarding applications, the dull polished specification is sufficient; for wash-down conveyor systems or outdoor installations — especially when chemical exposure is continuous — additional protective coatings should be evaluated separately.
In conveyor frame construction and pick-and-place robot structures, the 46x46 aluminum bracket provides a rigid yet repositionable corner joint. When building modular automation cells with 50-series aluminum profiles, pairing this reinforced angle casting at load-bearing corners distributes shear forces across the full contact area of the bracket face — a structural advantage over lighter stamped connectors in applications with continuous vibration or dynamic loading from servo-driven axes. The mounting bracket aluminum construction maintains dimensional stability under cyclic loading conditions typical in conveyor and pick-and-place automation.
For machine guarding frames and industrial workstations that are reconfigured regularly, the adjustable corner profile enables repositioning without replacing structural components. Engineers assembling multi-bay workstations or safety guarding structures can pre-position the corner connector at the required angle, secure with the included T bolts and flange nuts, and confirm alignment before final torque application — a straightforward installation sequence that reduces rework risk on the assembly floor. The complete hardware kit ensures immediate installation readiness without sourcing additional fasteners.
For OEM machine builders designing equipment across multiple models, component standardization at structural joints reduces SKU complexity and procurement overhead. The 46x46 aluminum bracket (310.3600A.01) serves as a repeatable structural junction element that can be specified across product lines using 50 slot 10 profile systems — provided the angular and load requirements fall within the connector's structural design parameters. The reinforced angle casting design supports consistent performance across multiple equipment generations without dimensional variation concerns.
Procurement managers sourcing structural hardware for European and North American manufacturing facilities evaluate aluminum bracket suppliers on dimensional consistency, documentation completeness, and supply reliability. The 46x46 aluminum bracket (PN 310.3600A.01) addresses the core procurement concern directly: a fully specified, die-cast aluminum structural connector with confirmed compatibility for 50 slot 10 modular framing systems, supplied with complete installation hardware. The reinforced angle casting construction and adjustable corner profile design combine to deliver both structural reliability and assembly flexibility in a single component.
This mounting bracket aluminum solution handles the structural loads typical in industrial automation frames, conveyor systems, and workstation structures — offering a technically credible choice for load-bearing joints that balances performance requirements with procurement cost efficiency. The aluminum structural components maintain T-slot compatibility with modular framing systems widely adopted in European and North American industrial automation, allowing integrators to incorporate this hardware into existing machine frameworks without redesign.
Are you a factory or trading company?
We are a self-owned factory providing one-stop service covering raw materials, surface treatment, technical sales, shipping, and after-sales support — enabling direct cost control, quality management, and lead time commitment for buyers sourcing the 46x46 aluminum bracket and related profile accessories.
What are your main products?
Aluminum profile components including the adjustable corner profile and reinforced angle casting bracket range, pipe and tube rack systems, and terminal applications.
What is your lead time?
Typically 10 to 15 days after payment confirmation for standard orders of the mounting bracket aluminum product range.
What packaging is used for export?
Products are packed in poly bags, placed in cartons, and shipped on plywood pallets suitable for sea freight export — protecting the surface finish during transit.
What delivery terms are available?
FOB Ningbo or CIF by sea or air freight.
EN
